Manufacturer: INEOS
Produced At: Korea / China
Product Category: PC
Product No: TRIREX 3022U
Product Quantity: 25KG / BAG
Product Features: Good Dimensional Stability,Good Electrical Properties,Good Flow,Low Moisture Absorption,Low Temperature Impact,Resistance,Medium Viscosity,UV Resistant,Weather Resistant
TRIREX? 3022U
TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries.
TRIREX 3022U is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property.
Superior low temperature impact resistance
Good flow-ability
Workable under a wide range of temperatures (-100 ? ~ 135 ?)
High electrical performance
Good dimensional stability
Low moisture absorbency
Good weather resistance
TRIREX 3022U resin grade is used for Injection molding products. UV stabilized.
Medium viscosity. Transparent colors only.
Additive |
|
Features |
|
Uses |
|
Appearance |
|
Forms |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
Density / Specific Gravity | 1.20 | ASTM D792 | |
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 16 | g/10 min | ASTM D1238 |
Water Absorption (24 hr, 73°F) | 0.15 | % | ASTM D570 |
Mechanical | Nominal Value | Unit | Test Method |
Tensile Strength (Yield) | 10000 | psi | ASTM D638 |
Tensile Elongation (Break) | 130 | % | ASTM D638 |
Flexural Modulus | 326000 | psi | ASTM D790 |
Flexural Strength (Yield) | 13500 | psi | ASTM D790 |
Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact (73°F, 0.125 in) | 17 | ft·lb/in | ASTM D256 |
Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load (264 psi, Unannealed) | 273 | °F | ASTM D648 |
CLTE - Flow | 2.8E-5 to 3.9E-5 | in/in/°F | ASTM D696 |
Electrical | Nominal Value | Unit | Test Method |
Volume Resistivity | 4.0E+16 | ohms·cm | ASTM D257 |
Dielectric Strength | 760 | V/mil | ASTM D149 |
Arc Resistance | 120 | sec | ASTM D495 |
Flammability | Nominal Value | Unit | Test Method |
Flame Rating (0.06 in) | V-2 | UL 94 |
Optical | Nominal Value | Unit | Test Method |
Haze | 0.40 | % | ASTM D1003 |
Injection | Nominal Value | Unit | |
Drying Temperature | 248 | °F | |
Drying Time | 3.0 to 5.0 | hr | |
Suggested Max Moisture | 0.020 | % | |
Rear Temperature | 455 to 500 | °F | |
Middle Temperature | 482 to 527 | °F | |
Front Temperature | 509 to 554 | °F | |
Nozzle Temperature | 509 to 572 | °F | |
Processing (Melt) Temp | 509 to 572 | °F | |
Mold Temperature | 149 to 221 | °F | |
Back Pressure | 36.3 to 102 | psi | |
Screw Speed | 40 to 70 | rpm | |
Vent Depth | 7.9E-4 to 3.1E-3 | in |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields