Manufacturer: INEOS
Produced At: Korea / China
Product Category: ABS
Product No: Terluran GP-25
Product Quantity: 25KG / BAG
Product Features: General Purpose,Good Colorability,Good Surface Finish,High Gloss,High Impact Resistance,Medium Flow
Terluran? GP-25
Excellent colorability
Medium flow
Good impact resistance
Good heat distortion resistance
High quality surface finish and gloss
Injection molding
Appliance housings
Household and sanitary appliances
Toys
Automotive components
Features |
|
Uses |
|
Forms |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
Density | 1.04 | g/cm3 | ISO 1183 |
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg) | 1.53 | in3/10min | ISO 1133 |
Molding Shrinkage | 0.40 to 0.70 | % | ISO 294-4 |
Water Absorption | ISO 62 | ||
Saturation, 73°F | 0.95 | % | |
Equilibrium, 73°F, 50% RH | 0.24 | % | |
Hardness | Nominal Value | Unit | Test Method |
Ball Indentation Hardness | 14400 | psi | ISO 2039-1 |
Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus | 334000 | psi | ISO 527-2 |
Tensile Stress (Yield, 73°F) | 6380 | psi | ISO 527-2 |
Tensile Strain (Yield, 73°F) | 2.4 | % | ISO 527-2 |
Nominal Tensile Strain at Break (73°F) | 12 | % | ISO 527-2 |
Flexural Stress | 9430 | psi | ISO 178 |
Impact | Nominal Value | Unit | Test Method |
Charpy Notched Impact Strength | ISO 179 | ||
-22°F | 3.3 | ft·lb/in2 | |
73°F | 9.0 | ft·lb/in2 | |
Charpy Unnotched Impact Strength | ISO 179 | ||
-22°F | 43 | ft·lb/in2 | |
73°F | 59 | ft·lb/in2 | |
Notched Izod Impact Strength | ISO 180/A | ||
-22°F | 3.3 | ft·lb/in2 | |
73°F | 10 | ft·lb/in2 |
Thermal | Nominal Value | Unit | Test Method |
Heat Deflection Temperature 2 | |||
66 psi, Annealed | 207 | °F | ISO 75-2/B |
264 psi, Annealed | 199 | °F | ISO 75-2/A |
Vicat Softening Temperature | |||
-- | 217 | °F | ISO 306/A50 |
-- | 205 | °F | ISO 306/B50 |
CLTE - Flow | 4.4E-5 to 6.1E-5 | in/in/°F | ISO 11359-2 |
Thermal Conductivity | 1.2 | Btu·in/hr/ft2/°F | DIN 52612 |
Electrical | Nominal Value | Unit | Test Method |
Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
Optical | Nominal Value | Unit | Test Method |
Yellowness Index | 15 | YI | DIN 6167 |
Injection | Nominal Value | Unit | |
Drying Temperature | 176 | °F | |
Drying Time | 2.0 to 4.0 | hr | |
Processing (Melt) Temp | 428 to 500 | °F | |
Mold Temperature | 86 to 140 | °F | |
Injection Velocity | 472 | in/min |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields