Manufacturer: DSM
Produced At: Europe / China
Product Category: Polyamide 46(PA46)
Product No: Stanyl TS250F6D
Product Quantity: 25KG / BAG
Product Features: Heat Stabilized、Lubricated、Heat Stabilized
Stanyl? TS250F6D
Contains release agent
Heat stabilized or stable to heat
Improved resistance to blistering
Lubricated
FPC connectors
WtB and BtB Connectors
Reflow connectors
Filler / Reinforcement |
|
Additive |
|
Features |
|
Uses |
|
Processing Method |
|
Resin ID (ISO 1043) |
|
Physical | Dry | Conditioned | Unit | Test Method |
Density | 1.68 | -- | g/cm3 | ISO 1183 |
Molding Shrinkage | ISO 294-4 | |||
Across Flow | 1.1 | -- | % | |
Flow | 0.40 | -- | % | |
Water Absorption | ISO 62 | |||
Saturation, 73°F | 5.5 | -- | % | |
Equilibrium, 73°F, 50% RH | 1.5 | -- | % | |
Viscosity Number | 160 | -- | cm3/g | ISO 307 |
Mechanical | Dry | Conditioned | Unit | Test Method |
Tensile Modulus | 1.74E+6 | 1.16E+6 | psi | ISO 527-2 |
Tensile Stress (Break) | 26100 | 18100 | psi | ISO 527-2 |
Tensile Strain (Break) | 2.5 | 3.5 | % | ISO 527-2 |
Flexural Modulus | 1.60E+6 | 1.06E+6 | psi | ISO 178 |
Impact | Dry | Conditioned | Unit | Test Method |
Charpy Notched Impact Strength | ISO 179/1eA | |||
-22°F | 4.8 | 4.8 | ft·lb/in2 | |
73°F | 5.2 | 5.2 | ft·lb/in2 | |
Charpy Unnotched Impact Strength | ISO 179/1eU | |||
-22°F | 24 | 24 | ft·lb/in2 | |
73°F | 29 | 29 | ft·lb/in2 | |
Notched Izod Impact Strength | ISO 180/1A | |||
-40°F | 5.2 | 5.2 | ft·lb/in2 | |
73°F | 5.2 | 5.2 | ft·lb/in2 |
Thermal | Dry | Conditioned | Unit | Test Method |
Heat Deflection Temperature | ||||
66 psi, Unannealed | 554 | -- | °F | ISO 75-2/B |
264 psi, Unannealed | 554 | -- | °F | ISO 75-2/A |
Glass Transition Temperature 3 | 167 | -- | °F | ISO 11357-2 |
Vicat Softening Temperature | 554 | -- | °F | ISO 306/B50 |
Melting Temperature 3 | 563 | -- | °F | ISO 11357-3 |
CLTE | ISO 11359-2 | |||
Flow | 1.4E-5 | -- | in/in/°F | |
Transverse | 3.1E-5 | -- | in/in/°F | |
RTI Elec (0.026 in) | 284 | -- | °F | UL 746 |
Effective Thermal Diffusivity | 1.05E-7 | -- | m2/s | |
Thermal Index - 5000 hr | 325 | -- | °F | IEC 60216 |
Injection | Dry | Unit |
Drying Temperature | 176 | °F |
Drying Time | 4.0 to 8.0 | hr |
Rear Temperature | 536 to 608 | °F |
Middle Temperature | 572 to 608 | °F |
Front Temperature | 572 to 608 | °F |
Nozzle Temperature | 572 to 608 | °F |
Processing (Melt) Temp | 581 to 608 | °F |
Mold Temperature | 176 to 248 | °F |
Injection Rate | Moderate-Fast | |
Back Pressure | 290 to 1450 | psi |
Screw Compression Ratio | 2.5:1.0 |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields