Manufacturer: DSM
Produced At: Europe / China
Product Category: Polyamide 46(PA46)
Product No: Stanyl TS271P4
Product Quantity: 25KG / BAG
Product Features: Lubricated
Stanyl? TS271P4
Lubricated
Wear and friction modified
Whisker reinforced
Filler / Reinforcement |
|
Additive |
|
Features |
|
Processing Method |
|
Resin ID (ISO 1043) |
|
Physical | Nominal Value | Unit | Test Method |
Density | 1.47 | g/cm3 | ISO 1183 |
Molding Shrinkage | ISO 294-4 | ||
Across Flow | 0.90 | % | |
Flow | 0.90 | % | |
Water Absorption (Equilibrium, 73°F, 50% RH) | 2.9 | % | ISO 62 |
Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus | 1.02E+6 | psi | ISO 527-2 |
Tensile Stress (Break) | 16000 | psi | ISO 527-2 |
Tensile Strain (Break) | 3.5 | % | ISO 527-2 |
Flexural Modulus | 870000 | psi | ISO 178 |
Impact | Nominal Value | Unit | Test Method |
Charpy Notched Impact Strength (73°F) | 1.9 | ft·lb/in2 | ISO 179/1eA |
Thermal | Nominal Value | Unit | Test Method |
Heat Deflection Temperature (264 psi, Unannealed) | 482 | °F | ISO 75-2/A |
Glass Transition Temperature 3 | 167 | °F | ISO 11357-2 |
Melting Temperature 3 | 563 | °F | ISO 11357-3 |
RTI Elec (0.031 in) | 149 | °F | UL 746 |
Flammability | Nominal Value | Test Method | |
Flammability Classification (0.031 in) | HB | IEC 60695-11-10, -20 |
Injection | Nominal Value | Unit |
Drying Temperature | 176 | °F |
Drying Time | 4.0 to 8.0 | hr |
Rear Temperature | 536 to 608 | °F |
Middle Temperature | 572 to 608 | °F |
Front Temperature | 572 to 608 | °F |
Nozzle Temperature | 572 to 608 | °F |
Processing (Melt) Temp | 581 to 608 | °F |
Mold Temperature | 176 to 248 | °F |
Injection Rate | Moderate-Fast | |
Back Pressure | 290 to 1450 | psi |
Screw Compression Ratio | 2.5:1.0 |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields