Manufacturer: DSM
Produced At: Europe / China
Product Category: Polyamide 46(PA46)
Product No: Stanyl TW241B3
Product Quantity: 25KG / BAG
Product Features: Heat Stabilized、Lubricated
Stanyl? TW241B3
Heat stabilized or stable to heat
Lubricated
Oil Pump Gears (automotive)
Power Lift Gate Actuators
Power Door Actuators
Power Window Actuators
Windshield Wiper Actuators
Power Seats
Filler / Reinforcement |
|
Additive |
|
Features |
|
Uses |
|
Processing Method |
|
Resin ID (ISO 1043) |
|
Physical | Dry | Conditioned | Unit | Test Method |
Density | 1.22 | -- | g/cm3 | ISO 1183 |
Molding Shrinkage | ISO 294-4 | |||
Across Flow | 1.1 | -- | % | |
Flow | 0.30 | -- | % | |
Water Absorption | ISO 62 | |||
Saturation, 73°F | 12 | -- | % | |
Equilibrium, 73°F, 50% RH | 3.2 | -- | % |
Mechanical | Dry | Conditioned | Unit | Test Method |
Tensile Modulus | 1.89E+6 | -- | psi | ISO 527-2 |
Tensile Stress (Break) | 26800 | 16000 | psi | ISO 527-2 |
Tensile Strain (Break) | 2.0 | 4.0 | % | ISO 527-2 |
Flexural Modulus | 1.52E+6 | 841000 | psi | ISO 178 |
Impact | Dry | Conditioned | Unit | Test Method |
Charpy Notched Impact Strength | ISO 179/1eA | |||
-22°F | 2.1 | 2.1 | ft·lb/in2 | |
73°F | 2.4 | 5.7 | ft·lb/in2 | |
Charpy Unnotched Impact Strength | ISO 179/1eU | |||
-22°F | 19 | 19 | ft·lb/in2 | |
73°F | 21 | 33 | ft·lb/in2 | |
Notched Izod Impact Strength | ISO 180/1A | |||
-40°F | 2.1 | 2.1 | ft·lb/in2 | |
73°F | 2.4 | 5.7 | ft·lb/in2 |
Thermal | Dry | Conditioned | Unit | Test Method |
Heat Deflection Temperature (264 psi, Unannealed) | 554 | -- | °F | ISO 75-2/A |
Glass Transition Temperature 2 | 167 | -- | °F | ISO 11357-2 |
Melting Temperature 2 | 563 | -- | °F | ISO 11357-3 |
CLTE | ISO 11359-2 | |||
Flow | 1.4E-5 | -- | in/in/°F | |
Transverse | 2.8E-5 | -- | in/in/°F |
Injection | Dry | Unit |
Drying Temperature | 176 | °F |
Drying Time | 4.0 to 8.0 | hr |
Rear Temperature | 536 to 608 | °F |
Middle Temperature | 572 to 608 | °F |
Front Temperature | 572 to 608 | °F |
Nozzle Temperature | 572 to 608 | °F |
Processing (Melt) Temp | 581 to 608 | °F |
Mold Temperature | 176 to 248 | °F |
Injection Rate | Moderate-Fast | |
Back Pressure | 290 to 1450 | psi |
Screw Compression Ratio | 2.5:1.0 |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields