Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Polyamide 46（PA46）
Product No: Stanyl TW242FM10
Product Quantity: 25KG / BAG
Product Features: Heat Stabilized，Lubricated
Stanyl? TW242FM10
Heat stabilized or stable to heat
Lubricated
Filler / Reinforcement |
|
Additive |
|
Features |
|
Processing Method |
|
Resin ID (ISO 1043) |
|
| Physical | Nominal Value | Unit | Test Method |
Density | 1.63 | g/cm3 | ISO 1183 |
Molding Shrinkage | ISO 294-4 | ||
Across Flow | 1.3 | % | |
Flow | 0.20 | % | |
Water Absorption | ISO 62 | ||
Saturation, 73°F | 6.8 | % | |
Equilibrium, 73°F, 50% RH | 1.8 | % |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus | 2.10E+6 | psi | ISO 527-2 |
Tensile Stress (Break) | 23200 | psi | ISO 527-2 |
Tensile Strain (Break) | 2.0 | % | ISO 527-2 |
Flexural Modulus | 1.60E+6 | psi | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
Charpy Notched Impact Strength | ISO 179/1eA | ||
-22°F | 2.1 | ft·lb/in2 | |
73°F | 2.9 | ft·lb/in2 | |
Notched Izod Impact Strength | ISO 180/1A | ||
-40°F | 1.9 | ft·lb/in2 | |
73°F | 2.9 | ft·lb/in2 |
| Thermal | Nominal Value | Unit | Test Method |
Heat Deflection Temperature | |||
66 psi, Unannealed | 554 | °F | ISO 75-2/B |
264 psi, Unannealed | 545 | °F | ISO 75-2/A |
Glass Transition Temperature 2 | 167 | °F | ISO 11357-2 |
Melting Temperature 2 | 563 | °F | ISO 11357-3 |
CLTE | ISO 11359-2 | ||
Flow | 1.4E-5 | in/in/°F | |
Transverse | 2.8E-5 | in/in/°F | |
Effective Thermal Diffusivity | 1.64E-7 | m2/s |
| Fill Analysis | Nominal Value | Unit | |
Melt Density | 1.43 | g/cm3 | |
Melt Thermal Conductivity | 2.7 | Btu·in/hr/ft2/°F | |
Specific Heat Capacity of Melt | 0.402 | Btu/lb/°F |
| Injection | Nominal Value | Unit |
Drying Temperature | 176 | °F |
Drying Time | 4.0 to 8.0 | hr |
Rear Temperature | 536 to 608 | °F |
Middle Temperature | 572 to 608 | °F |
Front Temperature | 572 to 608 | °F |
Nozzle Temperature | 572 to 608 | °F |
Processing (Melt) Temp | 581 to 608 | °F |
Mold Temperature | 176 to 248 | °F |
Injection Rate | Moderate-Fast | |
Back Pressure | 290 to 1450 | psi |
Screw Compression Ratio | 2.5:1.0 |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields
