Manufacturer: RADICI
Produced At: Europe / China
Product Category: Polyamide 610 (Nylon 610)
Product No: Radilon D E35ZW 100 NAT 6315
Product Quantity: 25KG / BAG
Product Features: Heat Stabilized，Renewable Resource Content，High Flexibility
Radilon? D E35ZW 100 NAT 6315
Additive |
|
Features |
|
Uses |
|
RoHS Compliance |
|
Appearance |
|
Processing Method |
|
Resin ID (ISO 1043) |
|
| Physical | Nominal Value | Unit | Test Method |
Density | 1.00 | g/cm3 | ISO 1183 |
Water Absorption | ISO 62 | ||
Saturation, 73°F, 0.0787 in | 1.9 | % | |
Equilibrium, 73°F, 0.0787 in, 50% RH | 0.80 | % |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus | 113000 | psi | ISO 527-2/1A/1 |
Tensile Stress (Yield) | 3770 | psi | ISO 527-2/1A/50 |
Nominal Tensile Strain at Break | > 100 | % | ISO 527-2/1A/50 |
Flexural Modulus 2 | 112000 | psi | ISO 178 |
Flexural Stress 2 | 3920 | psi | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
Charpy Notched Impact Strength (73°F) | 43 | ft·lb/in2 | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
Melting Temperature 3 | 428 | °F | ISO 11357-3 |
| Injection | Nominal Value | Unit | |
Drying Temperature - Desiccant Dryer | 176 | °F | |
Drying Time - Desiccant Dryer | 2.0 to 4.0 | hr | |
Dew Point - Desiccant Dryer | -4 | °F | |
Suggested Max Moisture | 0.10 | % | |
Processing (Melt) Temp | 446 to 500 | °F | |
Mold Temperature | 158 to 176 | °F | |
Injection Rate | Moderate | ||
| Extrusion | Nominal Value | Unit | |
Melt Temperature | 446 to 482 | °F |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields
