Manufacturer: RADICI
Produced At: Europe / China
Product Category: Polyamide 6 (Nylon 6)
Product No: Radilon S 32F 100 NAT
Product Quantity: 25KG / BAG
Product Features: Blown Film，Cast Film，Monofilaments
Radilon? S 32F 100 NAT
Features |
|
Uses |
|
RoHS Compliance |
|
Appearance |
|
Processing Method |
|
Resin ID (ISO 1043) |
|
| Physical | Dry | Conditioned | Unit | Test Method |
Density | 1.14 | -- | g/cm3 | ISO 1183 |
Water Absorption | ISO 62 | |||
Saturation, 73°F, 0.0787 in | 11 | -- | % | |
Equilibrium, 73°F, 0.0787 in, 50% RH | 2.9 | -- | % | |
Viscosity Number (H2SO4 (Sulphuric Acid)) | 185 | -- | cm3/g | ISO 307 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
Tensile Modulus | 421000 | 160000 | psi | ISO 527-2/1A/1 |
Tensile Stress (Yield) | 10900 | 5800 | psi | ISO 527-2/1A/50 |
Tensile Strain (Yield) | 4.0 | 30 | % | ISO 527-2/1A/50 |
Nominal Tensile Strain at Break | 90 | > 50 | % | ISO 527-2/1A/50 |
Flexural Modulus 2 | 363000 | 109000 | psi | ISO 178 |
Flexural Stress 2 | 14500 | 4350 | psi | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
Charpy Notched Impact Strength | ISO 179/1eA | |||
-22°F | 2.1 | -- | ft·lb/in2 | |
73°F | 3.6 | -- | ft·lb/in2 |
| Thermal | Dry | Conditioned | Unit | Test Method |
Heat Deflection Temperature | ||||
66 psi, Unannealed | 338 | -- | °F | ISO 75-2/Bf |
264 psi, Unannealed | 131 | -- | °F | ISO 75-2/Af |
Vicat Softening Temperature | 383 | -- | °F | ISO 306/B50 |
Melting Temperature 3 | 428 | -- | °F | ISO 11357 |
| Electrical | Dry | Conditioned | Unit | Test Method |
Surface Resistivity | 1.0E+12 | 1.0E+10 | ohms | IEC 60093 |
Volume Resistivity | 1.0E+15 | 1.0E+13 | ohms·cm | IEC 60093 |
Comparative Tracking Index | 600 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
Burning Rate | 0.0 | -- | in/min | FMVSS 302 |
Flame Rating (0.031 in) | HB | -- | UL 94 | |
Glow Wire Flammability Index | IEC 60695-2-12 | |||
0.04 in | 1560 | -- | °F | |
0.08 in | 1520 | -- | °F | |
Glow Wire Ignition Temperature | IEC 60695-2-13 | |||
0.04 in | 1610 | -- | °F | |
0.08 in | 1290 | -- | °F |
| Injection | Dry | Unit | |
Drying Temperature - Desiccant Dryer | 176 | °F | |
Drying Time - Desiccant Dryer | 2.0 to 4.0 | hr | |
Dew Point - Desiccant Dryer | < -4 | °F | |
Suggested Max Moisture | 0.15 | % | |
Processing (Melt) Temp | 482 to 536 | °F | |
Mold Temperature | 158 to 176 | °F | |
Injection Rate | Moderate | ||
| Extrusion | Dry | Unit | |
Drying Temperature | 176 | °F | |
Drying Time | 2.0 to 4.0 | hr | |
Suggested Max Moisture | 0.15 | % | |
Melt Temperature | 464 to 518 | °F |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields
