Manufacturer: RADICI
Produced At: Europe / China
Product Category: Polyamide 6 (Nylon 6)
Product No: Radilon S LRV300LUK 100 NAT
Product Quantity: 25KG / BAG
Product Features: High Flow,High Stiffness,Lubricated,Weather Resistant
Radilon? S LRV300LUK 100 NAT
Filler / Reinforcement |
|
Additive |
|
Features |
|
RoHS Compliance |
|
Appearance |
|
Processing Method |
|
Resin ID (ISO 1043) |
|
Physical | Dry | Conditioned | Unit | Test Method |
Density | 1.35 | -- | g/cm3 | ISO 1183 |
Water Absorption | ISO 62 | |||
Saturation, 73°F, 0.0787 in | 7.5 | -- | % | |
Equilibrium, 73°F, 0.0787 in, 50% RH | 2.0 | -- | % |
Mechanical | Dry | Conditioned | Unit | Test Method |
Tensile Modulus | 1.39E+6 | 928000 | psi | ISO 527-2/1A/1 |
Tensile Stress (Break) | 26100 | 16000 | psi | ISO 527-2/1A/5 |
Tensile Strain (Break) | 3.4 | 4.5 | % | ISO 527-2/1A/5 |
Flexural Modulus 2 | 1.29E+6 | -- | psi | ISO 178 |
Flexural Stress 2 | 37700 | -- | psi | ISO 178 |
Impact | Dry | Conditioned | Unit | Test Method |
Charpy Notched Impact Strength | ISO 179/1eA | |||
-22°F | 5.2 | -- | ft·lb/in2 | |
73°F | 6.2 | 9.5 | ft·lb/in2 | |
Charpy Unnotched Impact Strength | ISO 179/1eU | |||
-22°F | 33 | -- | ft·lb/in2 | |
73°F | 43 | 52 | ft·lb/in2 |
Thermal | Dry | Conditioned | Unit | Test Method |
Heat Deflection Temperature (264 psi, Unannealed) | 392 | -- | °F | ISO 75-2/Af |
Vicat Softening Temperature | 410 | -- | °F | ISO 306/B50 |
Melting Temperature 3 | 428 | -- | °F | ISO 11357 |
Electrical | Dry | Conditioned | Unit | Test Method |
Surface Resistivity | 1.0E+12 | 1.0E+10 | ohms | IEC 60093 |
Volume Resistivity | 1.0E+15 | 1.0E+13 | ohms·cm | IEC 60093 |
Comparative Tracking Index | 600 | -- | V | IEC 60112 |
Flammability | Dry | Conditioned | Unit | Test Method |
Burning Rate | 0.0 | -- | in/min | FMVSS 302 |
Flame Rating (0.031 in) | HB | -- | UL 94 | |
Glow Wire Flammability Index (0.08 in) | 1290 | -- | °F | IEC 60695-2-12 |
Injection | Dry | Unit | |
Drying Temperature - Desiccant Dryer | 176 | °F | |
Drying Time - Desiccant Dryer | 2.0 to 4.0 | hr | |
Dew Point - Desiccant Dryer | < -4 | °F | |
Suggested Max Moisture | 0.15 | % | |
Processing (Melt) Temp | 464 to 536 | °F | |
Mold Temperature | 176 to 194 | °F | |
Injection Rate | Moderate-Fast |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields