Manufacturer: Celanese
Produced At: Import/ China
Product Category: PBT
Product No: Crastin? S650FR NC010
Product Quantity: 25KG / BAG
Product Features: Flame Retardant
Crastin? S650FR NC010
Additive |
|
Features |
|
RoHS Compliance |
|
Forms |
|
Processing Method |
|
Part Marking Code (ISO 11469) |
|
Resin ID (ISO 1043) |
|
| Physical | Nominal Value | Unit | Test Method |
Density | 1.46 | g/cm3 | ISO 1183 |
Molding Shrinkage | ISO 294-4 | ||
Across Flow | 1.6 | % | |
Across Flow 3 | 2.2 | % | |
Flow | 1.8 | % | |
Flow 3 | 2.2 | % | |
Water Absorption | ISO 62 | ||
Saturation, 73°F, 0.0787 in | 0.39 | % | |
Equilibrium, 73°F, 0.0787 in, 50% RH | 0.15 | % |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus | 435000 | psi | ISO 527-2 |
Tensile Stress (Yield) | 9430 | psi | ISO 527-2 |
Tensile Strain (Yield) | 4.6 | % | ISO 527-2 |
Nominal Tensile Strain at Break | 7.2 | % | ISO 527-2 |
Tensile Creep Modulus | ISO 899-1 | ||
1 hr | 363000 | psi | |
1000 hr | 261000 | psi | |
Flexural Stress | 14500 | psi | ISO 178 |
Poisson's Ratio | 0.37 | ISO 527 | |
| Impact | Nominal Value | Unit | Test Method |
Charpy Notched Impact Strength | ISO 179/1eA | ||
-22°F | 1.7 | ft·lb/in2 | |
73°F | 1.9 | ft·lb/in2 | |
Charpy Unnotched Impact Strength | ISO 179/1eU | ||
-22°F | 31 | ft·lb/in2 | |
73°F | 33 | ft·lb/in2 | |
Notched Izod Impact Strength | ISO 180/1A | ||
-22°F | 1.9 | ft·lb/in2 | |
73°F | 1.9 | ft·lb/in2 | |
Unnotched Izod Impact Strength | ISO 180/1U | ||
-22°F | 20 | ft·lb/in2 | |
73°F | 21 | ft·lb/in2 |
| Thermal | Nominal Value | Unit | Test Method |
Heat Deflection Temperature | |||
66 psi, Unannealed | 320 | °F | ISO 75-2/B |
264 psi, Unannealed | 149 | °F | ISO 75-2/A |
Vicat Softening Temperature | 347 | °F | ISO 306/B50 |
Melting Temperature 4 | 430 | °F | ISO 11357-3 |
CLTE | ISO 11359-2 | ||
Flow | 6.7E-5 | in/in/°F | |
Transverse | 6.7E-5 | in/in/°F |
| Electrical | Nominal Value | Unit | Test Method |
Surface Resistivity | 1.0E+15 | ohms | IEC 60093 |
Volume Resistivity | > 1.0E+15 | ohms·cm | IEC 60093 |
Electric Strength | 640 | V/mil | IEC 60243-1 |
Relative Permittivity | IEC 60250 | ||
100 Hz | 3.40 | ||
1 MHz | 3.50 | ||
Dissipation Factor | IEC 60250 | ||
100 Hz | 7.1E-4 | ||
1 MHz | 0.018 | ||
Comparative Tracking Index | 225 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
Flame Rating | UL 94, IEC 60695-11-10, -20 | ||
0.030 in | V-0 | ||
0.06 in | V-0 | ||
Oxygen Index | 30 | % | ISO 4589-2 |
FMVSS Flammability | DNI | FMVSS 302 |
| Fill Analysis | Nominal Value | Unit | |
Ejection Temperature | 338 | °F |
| Injection | Nominal Value | Unit | |
Drying Temperature | 248 | °F | |
Drying Time - Desiccant Dryer | 2.0 to 4.0 | hr | |
Suggested Max Moisture | 0.040 | % | |
Processing (Melt) Temp | 464 to 500 | °F | |
Melt Temperature, Optimum | 482 | °F | |
Mold Temperature | 86 to 266 | °F | |
Mold Temperature, Optimum | 176 | °F | |
Holding Pressure | 8700 | psi | |
Back Pressure | As low as possible | ||
Drying Recommended | yes | ||
Hold Pressure Time | 3.00 | s/mm |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields
