Manufacturer: RTP Company
Produced At: Import / China
Product Category: Polyaryletherketone（PAEK）
Product No: RTP 3803
Product Quantity: 25KG / BAG
Product Features: Chemical Resistant， Good Moldability，Good Thermal Stability
RTP 3803
Filler / Reinforcement |
|
Features |
|
RoHS Compliance |
|
Appearance |
|
Forms |
|
Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
Density / Specific Gravity | 1.44 | ASTM D792 | |
Molding Shrinkage - Flow | 3.0E-3 to 5.0E-3 | in/in | ASTM D955 |
Water Absorption (24 hr, 73°F) | 0.10 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus | 1.30E+6 | psi | ASTM D638 |
Tensile Strength (Yield) | 21600 | psi | ASTM D638 |
Tensile Elongation (Break) | 2.5 | % | ASTM D638 |
Flexural Modulus | 1.00E+6 | psi | ASTM D790 |
Flexural Strength (Yield) | 33000 | psi | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact (0.125 in) | 1.5 | ft·lb/in | ASTM D256 |
Unnotched Izod Impact (0.125 in) | 14 | ft·lb/in | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load (264 psi, Unannealed) | 560 | °F | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
Dielectric Strength | 380 | V/mil | ASTM D149 |
| Flammability | Nominal Value | Unit | Test Method |
Flame Rating | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
Drying Temperature | 300 | °F | |
Drying Time | 3.0 | hr | |
Suggested Max Moisture | 0.010 | % | |
Suggested Max Regrind | 20 | % | |
Rear Temperature | 650 to 710 | °F | |
Middle Temperature | 670 to 730 | °F | |
Front Temperature | 690 to 750 | °F | |
Mold Temperature | 300 to 425 | °F | |
Injection Pressure | 10000 to 18000 | psi | |
Back Pressure | 25.0 to 100 | psi | |
Screw Speed | 60 to 90 | rpm | |
Clamp Tonnage | 5.0 to 8.0 | tons/in2 |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields
