Manufacturer: RTP Company
Produced At: Import / China
Product Category: Polyether Imide（PEI）
Product No: RTP 2105
Product Quantity: 25KG / BAG
Product Features: Glass Fiber,30% Filler by Weight
RTP 2105
Filler / Reinforcement |
|
RoHS Compliance |
|
Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
Density / Specific Gravity | 1.50 | ASTM D792 | |
Molding Shrinkage - Flow (0.126 in) | 2.0E-3 | in/in | ASTM D955 |
Water Absorption (24 hr, 73°F) | 0.18 | % | ASTM D570 |
Moisture Content | 0.040 | % | |
| Hardness | Nominal Value | Unit | Test Method |
Rockwell Hardness (R-Scale) | 123 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus | 1.55E+6 | psi | ASTM D638 |
Tensile Strength | 25100 | psi | ASTM D638 |
Tensile Elongation (Yield) | 2.6 | % | ASTM D638 |
Flexural Modulus | 1.45E+6 | psi | ASTM D790 |
Flexural Strength | 35700 | psi | ASTM D790 |
Compressive Strength | 24000 | psi | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact (0.126 in) | 1.6 | ft·lb/in | ASTM D256 |
Unnotched Izod Impact (0.126 in) | 13 | ft·lb/in | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load | ASTM D648 | ||
66 psi, Unannealed | 410 | °F | |
264 psi, Unannealed | 405 | °F | |
CLTE - Flow | 1.2E-5 | in/in/°F | ASTM E831 |
Thermal Conductivity 1 | 1.8 | Btu·in/hr/ft2/°F | ASTM E1530 |
| Electrical | Nominal Value | Unit | Test Method |
Volume Resistivity | > 1.0E+12 | ohms·cm | ASTM D257 |
Dielectric Strength 2 (in Oil) | 500 | V/mil | ASTM D149 |
Dielectric Constant (1 MHz) | 3.90 | ASTM D150 | |
Dissipation Factor (1 MHz) | 5.0E-3 | ASTM D150 | |
| Flammability | Nominal Value | Unit | Test Method |
Flame Rating (0.06 in, ** Values per RTP Company testing.) | V-0 | UL 94 |
| Additional Information | Nominal Value | Unit | |
Primary Additive | 30 | % |
| Injection | Nominal Value | Unit | |
Drying Temperature | 300 | °F | |
Drying Time | 4.0 | hr | |
Dew Point | -20 | °F | |
Processing (Melt) Temp | 670 to 750 | °F | |
Mold Temperature | 275 to 350 | °F | |
Injection Pressure | 12000 to 18000 | psi | |
| Injection Notes | |||
Desiccant Type Dryer Required. | |||
| Notes |
| 1Through-plane |
| 2Method A (Short-Time) |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields
