Manufacturer: Covestro
Produced At: Europe / China
Product Category: TPU
Product No: Texin 1210
Product Quantity: 25KG / BAG
Product Features: Abrasion Resistant，Chemical Resistant，F(xiàn)ood Contact Acceptable，Low Gel，Medium Clarity，Oil Resistant，Solvent Resistant
Texin? 1210
Features |
|
Uses |
|
Agency Ratings |
|
Appearance |
|
Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
Density / Specific Gravity | |||
-- | 1.22 | ASTM D792 | |
-- | 1.22 | g/cm3 | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
Durometer Hardness (Shore A) | 92 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
Flexural Modulus | ASTM D790, ISO 178 | ||
73°F | 10600 | psi | |
158°F | 4600 | psi | |
Taber Abrasion Resistance | |||
1000 Cycles, 1000 g, H-18 Wheel | 27.0 | mg | ASTM D1044 |
1000 Cycles, 1000 g, H-18 Wheel | 27.0 | mg | ISO 4649 |
| Elastomers | Nominal Value | Unit | Test Method |
Tensile Stress | ASTM D412, ISO 37 | ||
100% Strain | 1410 | psi | |
300% Strain | 2900 | psi | |
Tensile Strength (Yield) | 5800 | psi | ASTM D412, ISO 37 |
Tensile Elongation (Break) | 510 | % | ASTM D412, ISO 37 |
Tear Strength | |||
-- 2 | 737 | lbf/in | ASTM D624 |
-- | 740 | lbf/in | ISO 34-1 |
Compression Set 3 | ASTM D395B, ISO 815 | ||
73°F, 22 hr | 16 | % | |
158°F, 22 hr | 43 | % |
| Thermal | Nominal Value | Unit | Test Method |
Glass Transition Temperature | 6.80 | °F | DMA |
Vicat Softening Temperature | 190 | °F | ISO 306/50, ASTM D1525 4 |
| Injection | Nominal Value | Unit | |
Drying Temperature - Desiccant Dryer | 178 to 219 | °F | |
Drying Time - Desiccant Dryer | 2.0 | hr | |
Suggested Max Moisture | < 0.030 | % | |
Suggested Max Regrind | 20 | % | |
Rear Temperature | 360 to 385 | °F | |
Middle Temperature | 370 to 399 | °F | |
Front Temperature | 379 to 405 | °F | |
Nozzle Temperature | 385 to 410 | °F | |
Processing (Melt) Temp | 376 to 399 | °F | |
Mold Temperature | 61 to 100 | °F | |
Injection Pressure | 6000 to 15000 | psi | |
Injection Rate | Moderate | ||
Back Pressure | < 800 | psi | |
Screw Speed | 40 to 80 | rpm | |
Cushion | < 0.125 | in | |
| Injection Notes | |||
Hold Pressure: 60 to 80% of Injection Pressure | |||
| Extrusion | Nominal Value | Unit | |
Drying Temperature | 178 to 219 | °F | |
Drying Time | 2.0 | hr | |
Suggested Max Regrind | 20 | % | |
Cylinder Zone 1 Temp. | 360 to 390 | °F | |
Cylinder Zone 2 Temp. | 360 to 399 | °F | |
Cylinder Zone 3 Temp. | 360 to 399 | °F | |
Melt Temperature | 376 to 399 | °F | |
Die Temperature | 370 to 399 | °F | |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields
