Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Nylon 6(PA6)
Product No: Akulon K222-KMV5
Product Quantity: 25KG / BAG
Product Features: Flame Retardant,Heat Stabilized
Akulon? K222-KMV5
Contains release agent
Heat stabilized or stable to heat
Molded case circuit breakers
Miniature Circuit Breakers
Filler / Reinforcement |
|
Additive |
|
Features |
|
Uses |
|
Processing Method |
|
Resin ID (ISO 1043) |
|
Physical | Dry | Conditioned | Unit | Test Method |
Density | 1.38 | -- | g/cm3 | ISO 1183 |
Melt Volume-Flow Rate (MVR)(250°C/2.16 kg) | 1.22 | -- | in3/10min | ISO 1133 |
Molding Shrinkage | ISO 294-4 | |||
Across Flow | 0.82 | -- | % | |
Flow | 0.91 | -- | % | |
Water Absorption | ISO 62 | |||
Saturation, 73°F | 6.2 | -- | % | |
Equilibrium, 73°F, 50% RH | 1.8 | -- | % |
Mechanical | Dry | Conditioned | Unit | Test Method |
Tensile Modulus | 870000 | 363000 | psi | ISO 527-2 |
Tensile Stress (Break) | 9430 | 5080 | psi | ISO 527-2 |
Tensile Strain (Break) | 2.5 | 30 | % | ISO 527-2 |
Impact | Dry | Conditioned | Unit | Test Method |
Charpy Notched Impact Strength | ISO 179/1eA | |||
-22°F | 0.95 | -- | ft·lb/in2 | |
73°F | 0.95 | -- | ft·lb/in2 | |
Charpy Unnotched Impact Strength | ISO 179/1eU | |||
-22°F | 12 | -- | ft·lb/in2 | |
73°F | 14 | -- | ft·lb/in2 |
Thermal | Dry | Conditioned | Unit | Test Method |
Heat Deflection Temperature | ||||
66 psi, Unannealed | 401 | -- | °F | ISO 75-2/B |
264 psi, Unannealed | 230 | -- | °F | ISO 75-2/A |
Melting Temperature 3 | 428 | -- | °F | ISO 11357-3 |
CLTE | ISO 11359-2 | |||
Flow | 2.8E-5 | -- | in/in/°F | |
Transverse | 2.8E-5 | -- | in/in/°F | |
Effective Thermal Diffusivity | 7.63E-8 | -- | m2/s |
Electrical | Dry | Conditioned | Unit | Test Method |
Volume Resistivity | > 1.0E+15 | -- | ohms·cm | IEC 60093 |
Comparative Tracking Index | -- | 600 | V | IEC 60112 |
Flammability | Dry | Conditioned | Unit | Test Method |
Flammability Classification | IEC 60695-11-10, -20 | |||
0.030 in | V-2 | -- | ||
0.06 in | V-2 | -- | ||
Glow Wire Flammability Index | IEC 60695-2-12 | |||
0.030 in | 1760 | -- | °F | |
0.12 in | 1760 | -- | °F | |
Glow Wire Ignition Temperature | IEC 60695-2-13 | |||
0.030 in | 1290 | -- | °F | |
0.12 in | 1340 | -- | °F |
Fill Analysis | Dry | Conditioned | Unit | |
Melt Density | 1.17 | -- | g/cm3 | |
Melt Thermal Conductivity | 1.4 | -- | Btu·in/hr/ft2/°F | |
Specific Heat Capacity of Melt | 0.538 | -- | Btu/lb/°F |
Injection | Dry | Unit | |
Drying Temperature | 176 | °F | |
Drying Time | 4.0 to 8.0 | hr | |
Rear Temperature | 437 to 455 | °F | |
Middle Temperature | 446 to 464 | °F | |
Front Temperature | 455 to 482 | °F | |
Nozzle Temperature | 455 to 491 | °F | |
Processing (Melt) Temp | 473 to 509 | °F | |
Mold Temperature | 122 to 176 | °F | |
Injection Rate | Moderate-Fast | ||
Back Pressure | 435 to 1450 | psi | |
Screw Compression Ratio | 2.5:1.0 |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields