Manufacturer: TOYOBO
Produced At: Japan / China
Product Category: TPEE
Product No: PELPRENE S2002
Product Quantity: 25KG / BAG
Product Features: Flame Rated/ High Heat Resistance
PELPRENE? S2002
Flame Rated
Heat Resistant
Features |
|
Physical | Nominal Value | Unit | Test Method |
Density / Specific Gravity | 1.24 | ASTM D792 | |
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
Molding Shrinkage - Flow (0.0787 in) | 0.013 | in/in | ASTM D955 |
Water Absorption (Equilibrium, 73°F, 65% RH) | 0.38 | % | ASTM D570 |
Hardness | Nominal Value | Unit | Test Method |
Durometer Hardness | |||
Shore A | 97 | JIS K6301 | |
Shore D | 55 | ASTM D2240 |
Mechanical | Nominal Value | Unit | Test Method |
Tensile Strength | ASTM D638 | ||
-- | 5510 | psi | |
50% Strain | 2420 | psi | |
Tensile Elongation (Break) | 550 | % | ASTM D638 |
Flexural Modulus | 29900 | psi | ASTM D790 |
Compressive Strength (10% Strain) | 2360 | psi | ASTM D695 |
Taber Abrasion Resistance (1000 Cycles) | 12.0 | mg | ASTM D1044 |
Elastomers | Nominal Value | Unit | Test Method |
Tear Strength | 885 | lbf/in | ASTM D624 |
Compression Set | 61 | % | JIS K6301 |
Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact | No Break | ASTM D256 |
Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load (264 psi, Unannealed) | 225 | °F | ASTM D648 |
Brittleness Temperature | < -85.0 | °F | JIS K6301 |
Vicat Softening Temperature | 365 | °F | ASTM D1525 |
Melting Temperature | 403 | °F | DSC |
CLTE - Flow | 7.8E-5 | in/in/°F | ASTM E831 |
Electrical | Nominal Value | Unit | Test Method |
Volume Resistivity | 2.0E+13 | ohms·cm | ASTM D257 |
Dielectric Strength | 760 | V/mil | JIS K2111 |
Flammability | Nominal Value | Unit | Test Method |
Flame Rating | HB | UL 94 |
Additional Information | Nominal Value | Unit | Test Method |
Resilience | 60 | % | JIS K6301 |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields