Manufacturer: TOYOBO
Produced At: Japan / China
Product Category: PBT
Product No: PLANAC BT-1015-05
Product Quantity: 25KG / BAG
Product Features: Flame Rated/15%GF
PLANAC BT-1015-05
PLANAC BT-1015-05 is a Polybutylene Terephthalate (PBT) product filled with 15% glass fiber. It can be processed by injection molding and is available in Asia Pacific or North America.
Primary characteristic: flame rated.
Filler / Reinforcement |
|
Features |
|
Uses |
|
Forms |
|
Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
Density / Specific Gravity | 1.40 | ASTM D792 | |
Molding Shrinkage | ASTM D955 | ||
Flow | 4.0E-3 | in/in | |
Across Flow | 0.014 | in/in | |
Water Absorption (73°F, 24 hr) | 0.070 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
Rockwell Hardness (R-Scale) | 118 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus | 870000 | psi | ASTM D638 |
Tensile Strength | 14500 | psi | ASTM D638 |
Tensile Elongation (Break) | 4.0 | % | ASTM D638 |
Flexural Modulus | 725000 | psi | ASTM D790 |
Flexural Strength | 21800 | psi | ASTM D790 |
Compressive Strength | 16000 | psi | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact | 1.1 | ft·lb/in | ASTM D256 |
Unnotched Izod Impact | 7.5 | ft·lb/in | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load (264 psi, Unannealed) | 392 | °F | ASTM D648 |
CLTE - Flow (-22 to 212°F) | 2.5E-5 | in/in/°F | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
Dielectric Strength (0.0630 in) | 610 | V/mil | ASTM D149 |
Dielectric Constant (1 MHz) | 3.50 | ASTM D150 | |
Dissipation Factor (1 MHz) | 0.020 | ASTM D150 | |
Arc Resistance | 140 | sec | ASTM D495 |
Comparative Tracking Index (CTI) | 500 | V | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
Flame Rating (0.06 in) | HB | UL 94 |
| Additional Information | |||
The value shown for Comparative Track Index, UL 746, was tested in accordance with ASTM D3638. Flexural Elongation @ Break, ASTM D790: 4.5% |
| Injection | Nominal Value | Unit | |
Rear Temperature | 464 to 518 | °F | |
Middle Temperature | 464 to 518 | °F | |
Front Temperature | 464 to 518 | °F | |
Mold Temperature | 122 to 212 | °F |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields
