Manufacturer: TORAY
Produced At: Japan / China
Product Category: PA66
Product No: Amilan CM3006G-30
Product Quantity: 25KG / BAG
Product Features: Good Thermal Stability
Amilan? CM3006G-30
Flame Rated
Heat Resistant
Filler / Reinforcement |
|
Features |
|
Uses |
|
Part Marking Code |
|
Physical | Dry | Conditioned | Unit | Test Method |
Density (73°F) | 1.37 | -- | g/cm3 | ISO 1183 |
Molding Shrinkage 3 | Internal Method | |||
Across Flow : 0.118 in | 0.60 to 0.90 | -- | % | |
Flow : 0.118 in | 0.20 to 0.50 | -- | % | |
Water Absorption | ISO 62 | |||
73°F, 24 hr | 0.60 | -- | % | |
Saturation, 73°F | 5.5 | -- | % | |
Hardness | Dry | Conditioned | Unit | Test Method |
Rockwell Hardness | ISO 2039-2 | |||
M-Scale, 73°F | 97 | -- | ||
R-Scale, 176°F | 24 | -- | ||
R-Scale, 73°F | 121 | -- |
Mechanical | Dry | Conditioned | Unit | Test Method |
Tensile Stress | ISO 527-2 | |||
-40°F | 34100 | 31200 | psi | |
73°F | 27600 | 20300 | psi | |
176°F | 17400 | 14500 | psi | |
Tensile Strain | ISO 527-2 | |||
Break, -40°F | 2.0 | 2.5 | % | |
Break, 73°F | 2.5 | 3.0 | % | |
Break, 176°F | 5.0 | 5.5 | % | |
Flexural Modulus | ISO 178 | |||
-40°F | 1.68E+6 | 1.52E+6 | psi | |
73°F | 1.38E+6 | 986000 | psi | |
176°F | 841000 | 624000 | psi | |
Flexural Stress | ISO 178 | |||
-40°F | 47100 | 45700 | psi | |
73°F | 42100 | 31200 | psi | |
176°F | 27600 | 19600 | psi | |
Compressive Stress | ISO 604 | |||
-40°F | 36300 | 29000 | psi | |
73°F | 26100 | 16000 | psi | |
176°F | 16000 | 10200 | psi | |
Shear Strength (73°F) | 13800 | 12300 | psi | ASTM D732 |
Taber Abrasion Resistance (1000 Cycles) | 0.400 | -- | mg | ISO 9352 |
Coefficient of Friction - vs. Metal 4 | 0.15 | -- | Suzuki Method | |
Impact | Dry | Conditioned | Unit | Test Method |
Charpy Notched Impact Strength | ISO 179 | |||
-40°F | 4.8 | 5.7 | ft·lb/in2 | |
73°F | 6.2 | 7.6 | ft·lb/in2 | |
Charpy Unnotched Impact Strength | ISO 179 | |||
-40°F | 29 | 33 | ft·lb/in2 | |
73°F | 31 | 36 | ft·lb/in2 |
Thermal | Dry | Conditioned | Unit | Test Method |
Heat Deflection Temperature (66 psi, Unannealed) | 504 | -- | °F | ISO 75-2/B |
Melting Temperature | 509 | -- | °F | DSC |
CLTE - Flow | 1.1E-5 to 1.7E-5 | -- | in/in/°F | ISO 11359-2 |
Specific Heat | 0.430 | -- | Btu/lb/°F | |
Thermal Conductivity | 2.8 | -- | Btu·in/hr/ft2/°F |
Electrical | Dry | Conditioned | Unit | Test Method |
Volume Resistivity | 1.0E+13 | 1.0E+10 to 1.0E+11 | ohms·cm | IEC 60093 |
Electric Strength | 510 | 430 | V/mil | IEC 60243-1 |
Dielectric Constant 5 | IEC 60250 | |||
73°F, 50 Hz | 4.60 | 6.30 | ||
73°F, 1 kHz | 4.40 | 5.50 | ||
73°F, 1 MHz | 3.90 | 4.00 | ||
Dissipation Factor 5 | IEC 60250 | |||
73°F, 50 Hz | 0.020 | 0.080 | ||
73°F, 1 kHz | 0.020 | 0.080 | ||
73°F, 1 MHz | 0.020 | 0.040 | ||
Arc Resistance 6 | 114 | 120 | sec | UL 746 |
Flammability | Dry | Conditioned | Unit | Test Method |
Flame Rating (0.031 in) | HB | HB | UL 94 |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields