Manufacturer: INEOS
Produced At: Korea / China
Product Category: Methyl Methacrylate / ABS
Product No: Terlux HD 2802
Product Quantity: 25KG / BAG
Product Features: Balanced Stiffness/Toughness,Chemical Resistant,Good Stiffness,Good Surface Finish,High Clarity,High Impact Resistance
Terlux? HD 2802
Excellent transparency
Good resistance to chemicals
Good stiffness and surface finish
High impact strength
HD service package available
Medical devices
Features |
|
Uses |
|
Appearance |
|
Forms |
|
Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
Density | 1.08 | g/cm3 | ISO 1183 |
Apparent (Bulk) Density 3 | 0.59 | g/cm3 | |
Melt Volume-Flow Rate (MVR) | ISO 1133 | ||
220°C/10.0 kg | 0.122 | in3/10min | |
220°C/21.6 kg | 1.04 | in3/10min | |
Molding Shrinkage | 0.40 to 0.70 | % | ISO 294-4 |
Water Absorption (Saturation, 73°F) | 0.70 | % | ISO 62 |
| Hardness | Nominal Value | Unit | Test Method |
Ball Indentation Hardness | 10200 | psi | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus | 290000 | psi | ISO 527-2 |
Tensile Stress (Yield, 73°F) | 6960 | psi | ISO 527-2 |
Tensile Strain (Yield, 73°F) | 4.0 | % | ISO 527-2 |
Nominal Tensile Strain at Break (73°F) | 12 | % | ISO 527-2 |
Tensile Creep Modulus (1000 hr) | 181000 | psi | ISO 899-1 |
Flexural Stress | 10200 | psi | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
Charpy Notched Impact Strength | ISO 179 | ||
-22°F | 0.95 | ft·lb/in2 | |
73°F | 2.4 | ft·lb/in2 | |
Charpy Unnotched Impact Strength | ISO 179 | ||
-22°F | 38 | ft·lb/in2 | |
73°F | 57 | ft·lb/in2 |
| Thermal | Nominal Value | Unit | Test Method |
Heat Deflection Temperature 4 | |||
66 psi, Annealed | 201 | °F | ISO 75-2/B |
264 psi, Annealed | 194 | °F | ISO 75-2/A |
Vicat Softening Temperature | |||
-- | 221 | °F | ISO 306/A50 |
-- | 199 | °F | ISO 306/B50 |
CLTE - Flow | 4.4E-5 to 6.1E-5 | in/in/°F | ISO 11359-2 |
Thermal Conductivity | 1.2 | Btu·in/hr/ft2/°F | DIN 52612 |
| Electrical | Nominal Value | Unit | Test Method |
Surface Resistivity | 1.0E+15 | ohms | IEC 60093 |
Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
Dielectric Constant (100 Hz) | 2.90 | IEC 60250 | |
Dissipation Factor | IEC 60250 | ||
100 Hz | 0.016 | ||
1 MHz | 0.014 |
| Optical | Nominal Value | Test Method | |
Refractive Index | 1.540 | ISO 489 |
| Injection | Nominal Value | Unit | |
Drying Temperature | 158 | °F | |
Drying Time | 2.0 | hr | |
Processing (Melt) Temp | 446 to 500 | °F | |
Mold Temperature | 122 to 167 | °F | |
Injection Velocity | 472 | in/min |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields
