Manufacturer: DUPONT
Produced At: Import/ China
Product Category: NYLON 6/PA6
Product No: Zytel 73G30T NC010
Product Quantity: 25KG / BAG
Zytel? 73G30T NC010
Filler / Reinforcement |
|
Additive |
|
RoHS Compliance |
|
Forms |
|
Processing Method |
|
Multi-Point Data |
|
Part Marking Code (ISO 11469) |
|
Resin ID (ISO 1043) |
|
Physical | Dry | Conditioned | Unit | Test Method |
Density | 1.34 | -- | g/cm3 | ISO 1183 |
Molding Shrinkage | ISO 294-4 | |||
Across Flow | 1.0 | -- | % | |
Flow | 0.20 | -- | % | |
Water Absorption | ISO 62 | |||
Saturation, 73°F, 0.0787 in | 6.2 | -- | % | |
Equilibrium, 73°F, 0.0787 in, 50% RH | 1.8 | -- | % |
Mechanical | Dry | Conditioned | Unit | Test Method |
Tensile Modulus | 1.32E+6 | 827000 | psi | ISO 527-2 |
Tensile Stress (Break) | 24700 | 16000 | psi | ISO 527-2 |
Tensile Strain (Break) | 3.0 | 6.0 | % | ISO 527-2 |
Flexural Modulus | 1.31E+6 | 827000 | psi | ISO 178 |
Poisson's Ratio | 0.34 | 0.35 | ISO 527 | |
Impact | Dry | Conditioned | Unit | Test Method |
Charpy Notched Impact Strength | ISO 179/1eA | |||
-22°F | 6.2 | 5.7 | ft·lb/in2 | |
73°F | 9.5 | 12 | ft·lb/in2 | |
Charpy Unnotched Impact Strength | ISO 179/1eU | |||
-22°F | 48 | 45 | ft·lb/in2 | |
73°F | 48 | 48 | ft·lb/in2 | |
Notched Izod Impact Strength | ISO 180/1A | |||
-22°F | 5.7 | 5.7 | ft·lb/in2 | |
73°F | 8.1 | 11 | ft·lb/in2 | |
Unnotched Izod Impact Strength(73°F) | 38 | 38 | ft·lb/in2 | ISO 180/1U |
Thermal | Dry | Conditioned | Unit | Test Method |
Heat Deflection Temperature | ||||
66 psi, Unannealed | 430 | -- | °F | ISO 75-2/B |
264 psi, Unannealed | 410 | -- | °F | ISO 75-2/A |
Vicat Softening Temperature | 419 | -- | °F | ISO 306/B50 |
Melting Temperature 3 | 430 | -- | °F | ISO 11357-3 |
CLTE | ISO 11359-2 | |||
Flow | 1.6E-5 | -- | in/in/°F | |
Transverse | 6.7E-5 | -- | in/in/°F |
Electrical | Dry | Conditioned | Unit | Test Method |
Comparative Tracking Index | 550 | -- | V | IEC 60112 |
Flammability | Dry | Conditioned | Unit | Test Method |
Burning Rate 4 (0.0394 in) | 0.87 | -- | in/min | ISO 3795 |
Flame Rating (0.06 in) | HB | -- | UL 94, IEC 60695-11-10, -20 | |
FMVSS Flammability | B | -- | FMVSS 302 |
Fill Analysis | Dry | Conditioned | Unit | Test Method |
Melt Density | 1.31 | -- | g/cm3 | |
Specific Heat Capacity of Melt | 0.526 | -- | Btu/lb/°F | |
Thermal Conductivity of Melt | 1.6 | -- | Btu·in/hr/ft2/°F | |
Additional Information | Dry | Conditioned | Unit | Test Method |
Odor | 3.50 | -- | VDA 270 |
Injection | Dry | Unit | |
Drying Temperature | 176 | °F | |
Drying Time - Desiccant Dryer | 2.0 to 4.0 | hr | |
Suggested Max Moisture | 0.20 | % | |
Processing (Melt) Temp | 500 to 536 | °F | |
Melt Temperature, Optimum | 518 | °F | |
Mold Temperature | 122 to 212 | °F | |
Mold Temperature, Optimum | 176 | °F | |
Holding Pressure | 7250 to 14500 | psi | |
Drying Recommended | yes | ||
Hold Pressure Time | 3.00 | s/mm | |
Maximum Screw Tangential Speed | 472 | in/min |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields