国产av旡码专区亚洲av苍井空_人妻在卧室被老板疯狂进入国产_性色av一二三天美传媒_天干天干天啪啪夜爽爽99_极品成人影院

產品中心

Ixef? FC-1022

Ixef? FC-1022

產品產商：索爾維（SOLVAY）
產品產地：進口/中國
產品類別：IXEF PARA
產品型號：Ixef FC-1022
產品規格：25KG/包
產品特性：超強剛性，尺寸穩定性良好，出色的外觀，低吸濕性，高強度，好的消毒性，良好的抗蠕變性，流動性高，耐化學性良好，食品接觸，合規性，通用

Ixef? FC-1022

聚丙烯酰胺
產品說明:
Ixef? FC-1022 is a 50% glass-fiber reinforced, general purpose polyarylamide compound that exhibits very high strength and rigidity, outstanding surface gloss, and excellent creep resistance.

Ixef? FC-1022 is approved for food contact and meets FDA regulations for Ixef? FC-1022 NT 000 (natural) and Ixef? FC-1022 BK 001 (black) based on clearances granted by FCN 001242 for repeated use food contact applications with all food types, under FDA conditions of use B through H as described in Tables 1 and 2 of 21 CFR 176.170(c).

  • Black: FC-1022 BK 001

  • Natural: FC-1022 NT 000

填料/增強材料

  • 玻璃纖維增強材料, 50% 填料按重量

特性
  • 超強剛性,尺寸穩定性良好,出色的外觀,低吸濕性,高強度,好的消毒性,良好的抗蠕變性,流動性高,耐化學性良好,食品接觸的合規性,通用
用途
  • 電器用具,高光應用,食品服務領域,醫療器材
機構評級
  • FDA 21 CFR 176.170(c) 3NSF 51 4歐洲 10/1/2011 12:00:00 AM
RoHS 合規性

  • RoHS 合規

外觀
  • 黑色,自然色
形式

  • 粒子

加工方法

  • 注射成型

物理性能
干燥
調節后的
單位制
測試方法
密度
1.64
--
g/cm3
ISO 1183
收縮率
0.10 到 0.30
--
%
ISO 294-4
吸水率 (73°F, 24 hr)
0.16
--
%
ISO 62
機械性能
干燥
調節后的
單位制
測試方法
拉伸模量
2.83E+6
2.83E+6
psi
ISO 527-2
拉伸應力 (斷裂)
40600
37700
psi
ISO 527-2
拉伸應變 (斷裂)
1.9
2.2
%
ISO 527-2
彎曲模量
2.68E+6
--
psi
ISO 178
彎曲應力
55100
--
psi
ISO 178
沖擊性能
干燥
調節后的
單位制
測試方法
懸壁梁缺口沖擊強度
2.1
--
ft·lb/in
ASTM D256
無缺口懸臂梁沖擊
16
--
ft·lb/in
ASTM D256
熱性能
干燥
調節后的
單位制
測試方法
熱變形溫度 (264 psi, 未退火)
446
--
°F
ISO 75-2/A
線形熱膨脹系數 - 流動
8.3E-6
--
in/in/°F
ISO 11359-2
補充信息
干燥
調節后的


吸水性 - Equil, 65% RH
--



注射
干燥
單位制

干燥溫度
248
°F

干燥時間
0.50 到 1.5
hr

料筒后部溫度
482 到 500
°F

料筒前部溫度
500 到 554
°F

射嘴溫度
500 到 554
°F

加工（熔體）溫度
536
°F

模具溫度
248 到 284
°F

注射速度
快速


注射說明
Hot runners: 250°C to 260°C (482°C to 500°F)

Storage
Ixef? compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Ixef? resins be dried prior to molding following the recommendations found in this datasheet and/or in the Ixef? processing guide.

Drying
The material as supplied is ready for molding without drying. However, If the bags have been open for longer than 24 hours, the material needs to be dried. When using a desiccant air dryer with dew point of -28°C (-18°F) or lower, these guidelines can be followed: 0.5-1.5 hour at 120°C (248°F), 1-3 hours at 100°C (212°F), or 1-7 hours at 80°C (176°F).

Injection Molding
Ixef? FC-1022 compound can be readily injection molded in most screw injection molding machines. A general purpose screw is recommended, with minimum back pressure.

The measured melt temperature should be about 280°C (536°F), and the barrel temperatures should be around 250 to 260°C (482 to 500°F) in the rear zone, gradually increasing to 260 to 290°C (500 to 554°F) in the front zone. If hot runners are used, they should be set to 250 to 260°C (482 to 500°F).

To maximize crystallinity, the temperature of the mold cavity surface must be held between 120 and 140°C (248 and 284°F). Molding at lower temperatures will produce articles that may warp, have poor surface appearance, and have a greater tendency to creep. Set injection pressure to give rapid injection. Adjust holding pressure and hold time to maximize part weight. Transfer from injection to hold pressure at the screw position just before the part is completely filled (95-99%).


如需索爾維（SOLVAY）原廠物性表及相關文件，請聯系我們工作人員，謝謝！

產品被廣泛應用于塑料改性、汽車、建筑、電子電氣、工業、日用品等多種領域

立即咨詢

上海朗祺塑膠原料有限公司   滬ICP備12022668號 公安機關備案號：31011202003696

展開