国产av旡码专区亚洲av苍井空_人妻在卧室被老板疯狂进入国产_性色av一二三天美传媒_天干天干天啪啪夜爽爽99_极品成人影院

產品中心

Algoflon? F 7

Algoflon? F 7

產品產商:索爾維(SOLVAY)
產品產地:進口/中國
產品類別:Algoflon PTFE
產品型號:Algoflon F 7
產品規格:25KG/包
產品特性:耐化學性良好


Algoflon? F 7

聚四氟乙烯
產品說明:
Algoflon? F 7 is a fine cut homopolymer PTFE powder that is white, granular and non-free flowing. It is designed for normal compression molding and in particular molding of large billets for low thickness skived tapes down to 1 mil (25 μm).

Algoflon? F 7 exhibits high bulk density, optimum isotropic behavior and very good mechanical and electrical properties.

Main features of Algoflon? F 7 are:

  • Optimum mechanical properties

  • Optimum isotropic properties

  • Very good electrical properties

  • Excellent surface finishing

  • Excellent skivability


特性
  • 耐化學性良好

用途
  • 混合添加劑
機構評級
  • FDA 21 CFR 177.1550

外觀
  • 白色

形式
  • 粉狀

加工方法
  • 壓縮模塑

物理性能
額定值
單位制
測試方法
比重
2.17

ASTM D792
平均顆粒尺寸 2
0.59
mil
內部方法
收縮性 - 徑向
3.0
%
ASTM D4894
體積密度
410
g/l
ASTM D4894
機械性能
額定值
單位制
測試方法
斷裂伸長率
400
%

抗張強度
6382
psi
ASTM D4894
電氣性能
額定值
單位制
測試方法
介電強度
1900
V/mil
ASTM D149
補充信息
Processing
  • Algoflon? F 7 is processed according to methods generally used for normal compression molding. Prior to use, the powder must be conditioned above 19°C/66°F.

  • The processing involves typically two steps: preforming and sintering. Initially the powder is compacted into a preform. This is then sintered using precise sintering (heating and cooling) cycle to take the temperature above the PTFE crystalline melting point to attain the final article. The preforming pressure, dwell time at maximum sintering temperature and cooling rate are all established according to the shape and size of the final item.


Storage and Handling
  • Algoflon? PTFE fine cut powders must be stored and handled carefully to achieve defect-free molding. Before use the temperature of the powder must be conditioned above 19°C/66°F (between 21-27°C/70-81°F). Below this temperature the powder is difficult to mold without cracks. Temperatures that are too high should also be avoided to prevent powder lumping and poor flow.

  • Storage and handling facilities should be clean since even very small foreign particles can cause defects in finished products. Keep resin drums closed and clean. Good housekeeping and careful handling are essential.


Safety and Toxicology
  • Before using Algoflon? PTFE fine cut powders, consult the product Material Safety Data Sheet and follow all label directions and handling precautions.

  • As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Vapor extractor units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact, wash with soap and water. In case of eye contact, flush with water immediately and seek medical help.

  • Do not smoke in areas contaminated with powder, vapor or fumes.

  • See Material Safety Data Sheet for detailed advice on waste disposal methods.


Packaging
  • Algoflon? F 7 is packaged in 25 kg nonreturnable drums. Each drum contains two bag liners made of polyethylene resin.


Additional Technical Information
  • For Material Safety Data Sheet or additional technical information, consult your Solvay sales representative or the website: www.solvayspecialtypolymers.com



如需索爾維(SOLVAY)原廠物性表及相關文件,請聯系我們工作人員,謝謝!

產品被廣泛應用于塑料改性、汽車、建筑、電子電氣、工業、日用品等多種領域

立即咨詢
展開